Your current browser version is too low, in order to bring you a better browsing effect, please use a higher version browser

Feeding System(Feeding Car &Electromagnetic chuck)

Huaxin specialize in the design,research,manufacture and sale of the Water Cooling equipment. Main products: Closed Cooling Water, Transverse Flow Cooling Tower, Countercurrent Tower, Refrigerating Machine and Evaporative Machine etc.

Company has the extensive products,we can also provide other relative accessories and technical consultation at the same time.Keeping improving is our constant purpose, every step we can do better from the selection of the raw material to the research and manufacture of a series products.We consider more for our clients

Product Manual

  1. Adopt special magnetic circuit design, with big magnetism. The coil is made of aluminum wire, and the coil protection plate is made of rolled high manganese steel. Light weight, low energy consumption, large lifting weight and long service life.
  2. The insulation structure is reasonable. Insulation treatment uses vacuum drying and vacuum glue filling, which improves the electrical and mechanical properties of the coil. The heat-resistant grade of the insulating material can reach the special C grade.
  3. Adopt constant voltage control mode, if you change to strong magnetic control mode, you can improve the lifting capacity
  4. Simple structure, safe and reliable, suitable for all kinds of lifting equipment.

Product Advantages

  1. Strong suction, can absorb more steel and other substances
  2. Energy efficient
  3. Easy installation and simple operation
  4. Easy to maintain and use with confidence
  5. High conversion rate after power on
  6. Special coils can guarantee a long service life
  7. Fully enclosed structure, good sealing

Main Parameters

 

Model Cold-State Power

(KW)

Current A Cold/Hot State  Overall Dimension(mm)  Weight (KG)  Lifting Capacity(kg)
A c F E G  

Steel Ball

Casting Ingot  Turnings
MW5-50L/1 2.6 11.8/7.7 500 700 160 90 25 220 1200 220/130 80/65
MW5-60L/1 3.0 13.6/*8.9 600 750 160 90 25 340 2000 290/170 95/80
MW5-70L/1 3.3 15/9.8 700 800 160 90 30 490 2500 380/200 120/100
MW5-80L/1 4.0 18/12 800 800 160 90 30 620 3000 480/250 150/130
MW5-90L/1 5.9 26.8/17.5 900 1090 200 125 40 800 4500 600/400 250/200
MW5-110L/1 7.7 35/22.8 1100 1140 220 150 45 1350 6500 1000/800 450/400
MW5-120L/1 10 45.5/29.5 1200 1100 220 150 45 1700 7500 1300/1000 650/500
MW5-130L/1 12 54.5/35.5 1300 1240 250 175 50 2010 8500 1400/1100 700/600
MW5-150L/1 15.6 70.9/46.1 1500 1250 350 210 60 2830 11000 1900/1500 1100/900
MW5-165L/1 16.5 75/48.8 1650 1590 370 230 75 3200 12500 2300/1800 1300/1100
MW5-180L/1 22.5 102.3/66.5 1800 1490 370 230 75 4230 14500 2750/2100 1600/1350
MW5210L/1 28.4 129/84 2100 1860 400 250 80 7000 21000 3500/2800 2200/1850
MW5-240L/1 33.9 154/100 2400 2020 450 280 90 9000 26000 4800/3800 2850/2250
MW5-260L/1 35.6 162/105 2600 2100 450 280 90 10100 30000 6100/4900 3600/3850
MW5-280L/1 39 178/116 2800 2700 500 300 100 12450 34000 7100/5700 4450/3400
MW5-3OOL/1 41.6 189/123 3000 2300 500 300 100 14980 39000 8350/6700 5250/4100

Feeding Car:

Product Description

Electric furnace charging car is a vibration feeding device specially designed and developed for melting electric furnace. The car adopts the vibration feeding method, which is convenient to use, stable feeding, can minimize the impact of the material block on the furnace body, and the feeding is more in line with the process requirements.

According to the different walking directions, the electric furnace feeding vehicle can be divided into two types: one-way straight travel and two-way straight travel. One-way straight travel, each electric furnace is equipped with a feeding car. Two-way straight travel, one feeding car can meet the feeding needs of multiple electric furnaces, and the feeding car can move horizontally and vertically.

Advantages and Features

  1. Feeding the electric furnace in the form of vibration, the drop is small, safe and convenient.
  2. The feeding process of the electric furnace charging car is controlled by the program controller. The program control and the electric furnace melting system are interlocking control systems, with manual and automatic functions. The electric furnace charging car has stepless speed regulation function when starting and stopping.
  3. With emergency stop and over-travel protection. The cable reel is used to retract the power cable, which is safe, stable, convenient and reliable.
  4. This feeding truck is suitable for the layout of the material warehouse behind the electric furnace, and the feeding truck can be used interchangeably.
  5. The vibration system has a reliable structure, long service life, easy maintenance, and low-quality rubber springs.
  6. The tank body and frame adopt special technology, structure and material, and the design is reasonable and reliable, with good rigidity, high strength and long service life.
  7. The lower part of the blanking opening is designed with heat-resistant steel plate heat insulation rubber pad to reduce oxidative corrosion due to heat.
  8. The car body and the material trough are made of double-layer steel plates and sound-absorbing rubber plates, and the inner lining is fixed with countersunk bolts, which is easy to disassemble and replace.
  9. Extend the service life of the electric furnace, reduce the work intensity of the workers and reduce the production cost.

Technical Parameters

Feeding Car capacity 3 5 7
Applicable electric furnace capacity T 3 5 10
Feeding speed T/Min 1.5(Iron) 2(Iron) 2
Walking speed M/Min 20(Adjust) 20(Adjust) 20
Walking motor KW 1.5 1.5 2.2
Vibration motor KW 2×2.2 2×3.7 2×5.5
Noise dB <75 <75 <75
Dimensions mm (adjustable according to customer site) 4200×1900×1800 5900×2300×2000 6100×2300×2400
Gauge mm (adjustable according to customer site) 1500 1800 2000

Оставить сообщение